£419 excl. VAT
AHM BOXER 16V 36-1 front crank trigger wheel and mounting set up. Fits the std crank key way, trigger wheel fits between the crank belt pulleys, replacing the std divider, the wheel is tapered so the belt will not rub on the teeth.
Front cover needs a small modification to suit our mounting, see picture
Simply fit the std Bosch crank sensor from the rear of the engine.
Front cover and sensor not included.
AHM 36-1 Trigger Wheel for use with Motec, Omex and other engine management systems
fits between the 2 cam belt drive pulleys.
The wheel is 4 mm thick at the center and tappers to 3 mm at the outer to stop the belts rubbing on the teeth and damaging them.
( The wheel is 1 mm thicker then the std spacer it replaces, add a 1 mm washer behind your cam tens pulleys on the front cam belt.)
Front cover needs a small modification to suit our mounting, see picture
Simply fit the std Bosch crank sensor from the rear of the engine.
(Front engine cover and sensor not included.)
